Lifting & Rigging

Crosby forged wire rope clips used to terminate a wire rope. Designed meet the performance requirements of EN13411:2003. Crosby Clips, all sizes &g...

Crosby HG226 eye/eye Turnbuckles are manufactured with the end fittings quenched and tempered. The bodies are heat treated by normalizing, the fini...

Crosby HG228 jaw/jaw Turnbuckles are manufactured with the end fittings quenched and tempered. The bodies are heat treated by normalizing, the fini...

Crosby McKissick 418 & 419 Snatch Blocks. Unique opening feature permits insertion of rope while block is suspended from gin-pole or other moun...

World famous, USA manufactured Crosby G209 carbon, screw pin anchor shackle. Available in loads up to 55t from stock. Designed to meet the performa...

USA manufactured Crosby G2130 carbon bolt anchor shackle used in rigging & lifting applications worldwide. The G2130 is ABS type approved with ...

Crosby MAGNEX Lever Operated Permanent Lifting Magnets - 150kg to 2000kg MAGNEX provides a fast and efficient method for lifting plates and round s...

Crosby IP10 & IPU10 Vertical Plate Clamp with Fixed Hoisting Eye. Used for the lifting, turning, moving or vertical transfer of sheet, plates, ...

This is a versatile lifting / spreader beam which complies with ASME standards. Features include adjustable bail, spreads and lifting points plus t...

This adaptable lifting beam has adjustable spreaders and lifting bail as standard. The spread adjusts in 6” increments along the lifting beam and t...

This lifting beam is designed to be used with slings in a basket hitch. “Bull Horn” style hooks are set on top of the beam helping to reduce the ov...

The Caldwell Fixed Spread Lifting Beam complies with ASME standards and is a lightweight solution for handling loads of the same size. Eye hooks wi...

A low headroom beam with multiple spreads providing flexible solutions to handle a wider range of load sizes. Comes with swivel hooks and latches a...

Caldwell designed this beam specifically for handling bulk containers with nylon loops in each corner. Low headroom design constructed of tubing fo...

This Caldwell adjustable spreader beam is ideal for outdoor applications and where headroom is not limited. The beam adds stability to the lift and...

Build your own spreader beam, these spreader beam end fittings are designed to work with a range of shackle sizes, both top and bottom. Complies wi...

The Caldwell Adjustable Load Lifter enables you to use your overhead crane to handle a wide range of loads. Once the bail pin is set the pallet lif...

The Caldwell Fixed Fork Pallet Lifter converts an overhead crane to a lift truck and allows for ease of loading and unloading in not so accessible ...

Caldwell Die Lifting Tongs are used for lifting dies with an overhead lifting device. They have a broad capacity range, a low headroom design and p...

The Manual Rig-Release simply hooks to your crane or spreader beam, slings are attached directly to the lifting device to rig the load. It allows y...

The Caldwell Radio Controlled Rig-Release allows rigging to be released from a safe distance with a push of a button. Designed for rugged outdoor t...

The Caldwell Barrier Grab has a new, compact and rugged design, handling concrete barriers from 6” – 12” nominal width at the top of the barrier. T...

The new Caldwell Adjustable Lifting Grab is ideal for lifting solid materials such as blocks of concrete, stone, rough marble and granite. Designed...

These heavy-duty Caldwell Beam Grabs provide an efficient method for handling wide flange beam sections and plate girders. For longer beams or gird...

Caldwell Girder Clamps provides an efficient method for handling a wide range of flange beam sections and plate girders. The simple design ensures ...

New from Caldwell, the Beam Web Clamp is designed to grip the center web of the I-beam, while the throat of the clamp pinches the flange during sid...

Caldwell Beam Flange Clamps are a lightweight and portable design and have rated load capacities from 1 to 10 tons. The left-hand thread and right-...

Caldwell Slab Tongs are for use in construction work to position slabs. They are specifically designed for lifting dry slabs of concrete, stone or ...

The Caldwell Model VDC is used for vertical lifting and transporting of closed or open metal drums. It is capable of handling one drum at a time. T...

The Caldwell Tea Cup Pipe Carrier is a light-weight and economical solution for handling large precast concrete water and sewer pipes. Three sizes ...

The Caldwell Low Profile Tea Cup is a light-weight and economical solution for handling concrete, water and sewer pipes. Three sizes available to h...

Optional Tea Cup lifting sling for use with PC-3/4, 1 and 1-1/2. For features and options please view the datasheet

The Caldwell Model CPP is a patented concrete Pipe Pick™ which is a quicker, safer and cleaner method of handling precast concrete pipe. The tilt h...

Caldwell Model PH Pipe Hooks are manufactured to ASME standards and are designed for lifting and carrying steel or cast iron pipe. Pipe Hooks have ...

NEW – The Caldwell Reel Lifter has four standard sizes in capacities from 500 to 11,000 pounds. A lightweight and easy to use tool that will make u...

The Caldwell Telescopic Fork Boom is available in 3,000, 4,000, 6,000 and 8,000 lb capacities. It is manufactured with a fixed length telescoping b...